Showing posts with label wall decor. Show all posts
Showing posts with label wall decor. Show all posts

Saturday, February 8, 2014

HULTET bamboo dish wall clock


Materials: HULTET Bamboo plate, VATTNA wall clock, cable binder, acrylic paint

Description: First of all, this is not my own hack - I got the idea from here.

Photo: IKEA.com
But in the original hack there were no instructions, so I thought a more detailed description might help you. Also want it to be seen :)

You'll need a HULTET bamboo plate (~7€)and a cheap clockwork (I bought the VATTNA wall clock, because it was on sale (~2€).

Things to consider:
1. the length of the bolt, on which you fasten the nut (so the clockwork doesn't fall out) has to me a little thicker than the bamboo plate.
2. Both clock hands have to be bendable, so you can match the plate's shape.




How to build:
1. Drill a hole in the center of the plate, size should match the bolt of your clockwork.
2. Position the clockwork and bring on the borders. I used some rest wood and sawed it appropriately. Fix it with screws to the bamboo plate, but choose them carefully, so they don't come out on the other side!
3. Attach the middle part of the cablebinder as a hanger and fix it somehow (see the picture how I did it).
The two knobs at the bottom are for stability, I made them out of synthetic cork (wine bottle).
4. Paint the plate as you like :)
5. Bind the clock hands according to the shape of the plate.
6. Assemble the clockwork and enjoy ;)

~ Sergej Koala, Germany

Tuesday, May 14, 2013

iCork Clock


Materials: Kvissle, iHome, hot glue gun, drywall screws, Drill, magnets

Description: I first got the idea from the Kvissle Boom Box Hack.

I took my old iHome apart. The speakers didn't work and the some of the buttons were malfunctioning. So I got rid of all the unnecessary components.

I traced the clock screen onto the back of the cork top and cut it out with an Xacto knife, then hot glued it to the cork. The cork flaked a bit in some areas so if I redo it I might try another technique.



I positioned the circuit board and hot glued the button and nobs components directly to the inside of the box.

The top is held on by magnets which were hot glued as well.

The power cord was routed through the side hole of the box and i secured it to the wall using screws through the foam pad holes.

~ Mason R, California