Showing posts with label media storage. Show all posts
Showing posts with label media storage. Show all posts

Tuesday, May 28, 2013

Vintage Look Tarva TV Console


Materials: Tarva 6-Drawer Chest, Decorative Knobs, Wood Stain & Paint

Description: Well once again we were on the hunt for an entertainment center, but IKEA's selection came up a little short. The have a lot of "vintage" look items, but their TV consoles seem to be pretty modern across the board. Not to mention, a unit with sufficient storage can get pretty pricey.

Luckily for us DIY-er's, they have the Tarva line of unfinished wood products. Thus, we were able to get the 6-drawer chest for a whopping $149.00. Even out-of-the-box, the chest is a great substitute for an otherwise pricey entertainment center.

To go along with our theme though, the chest needed a little face lift. A small can of some "espresso" wood stain for the drawers and a large can of some "ebony" wood stain for the frame and we were off to a good start...



After applying the stain and letting that dry (no polyurethane was applied), we assembled the dresser. With the drawers left out, we lightly brushed a thin layer of some cream colored latex paint to the frame of the dresser.

For the final touch, we opted to use some decorative pull knobs from our local hardware store instead of the basic ones supplied with the dresser.

All in all, this was a very simple hack with absolutely great results. We had originally planned to use casters, but were happy with how it currently sits.

~ Christopher Clemons, Florida

Friday, May 24, 2013

Easy Mid Century Ikea Credenza


Materials: 2x4 Expedit, hairpin legs, wood

Description: After moving, I had two problems that needed solving. First, I needed a place to put my record player and I had a 2x4 Expedit that I no longer needed. Rather than just turn it sideways and put my stuff on it, I decided to remove one of the smaller boards to make room for my receiver as well.


I also decided to put four hairpin legs on my bookcase which I did by first getting a board that was 1x3 ft. and spray painting it black. I then attached it to what would be the bottom of the credenza by getting some wall anchors, putting them into the bottom of the Expedit, and attaching the board to it.

Then it was just a matter of screwing the hairpin legs into the board. I was sure to use screws long enough to go both threw the board and into the Expedit for added stability. I finished it off with two drawers that I had and two DRĂ–NA boxes.

~ Dave, Texas