Showing posts with label Pax. Show all posts
Showing posts with label Pax. Show all posts

Saturday, February 8, 2014

Built in Pax Wardrobes for Alcoves


Materials: Pax, Komplement clothes rail and drawers, MDF, 4x2,

Description: 1. Build a frame to fit your space using 4x2 timbers- think about how you'll use your wardrobe and affix additional timbers to the sides for the runners you'll need for your drawers, shoe racks, baskets etc.
2. Take an Ikea Komplement clothes rail and remove the end. Then, using a jigsaw, cut to size to fit the wardrobe and simply replace the end, then screw into place.
3. To re-size Komplement drawers, remove one end of the drawer (preferably on the side that will later end up hidden, i.e. against the wall) and slide out the base. Carefully measure, mark and then cut the base down to size, then slot back into place. To re-fit the end, you'll need to drill 2 holes- one in the front panel of the drawer and one in the back panel- and then screw the side into place.



4. Affix drawer runners to the side timbers of your new wardrobe frame and slot the drawers into place.
5. Cut an MDF sheet to size to fit the exposed side of the frame.
6. Cut an MDF sheet to size to fit the 'roof', then use a router to make neat holes for air circulation, lower into place on top of the timber frame
7. Cut MDF sheets for the doors and if you want some detailing, use thin MDF pieces to create a panelled effect- glue and pin to the doors.
8. Use some attractive hinges to fit the doors to the frame.
9. Prime and paint the wardrobe, then attach door handles.
10. Stand back and admire!

See more of the built-in Pax wardrobe.

~ Lucy

Saturday, June 1, 2013

Pax Built-in for sloping ceiling


Materials: PAX closet BIRKELAND doors FINTORP handle

Description: First I have measured the space between the closet and the ceiling this was about 20 cm. I have used 2 rows of aerated concrete blocks of 10 cm direct on the floor to raise the closet 10 cm.

After placing the blocks I had to cut all sides of the closet because at 160 cm (170cm from the floor) the roof slope began. Don't forget to cut the right side, I messed up one panel :(. I have added some wood laths on the walls to mount the covering.



After this I have mounted a wooden lath over the closet to give it more strength and to mount the ceiling covering. After all closets were placed and connected to each other and to the wall I have screwed 12 mm carton board to finish. After grounding I have used a self adhesive MDF finishing profile to make a nice connection to the walls and ceiling. I have used Acrylic kit to finish it up and used white paint.

~ Bram van Tienhoven, NL Hendrik Ido Ambacht

Monday, May 20, 2013

Hallway storage from Pax wardrobe


Materials: Pax wardrobe

Description: We have a side door that never gets used. Stuff got piled in front of it all the time, so it was time to do something.

I cut a Pax wardrobe half and fixed it in front of the door. I needed two doors, which were cut half. I used one door for side filler panes to make it look like built in unit. Second door was used in a shoe rack project.
Top needed to be more solid than wardrobe top. I used a kitchen worktop for finishing.
Inside I have one rail for coats and space for shoes.

~ Design by Mika, UK