Showing posts with label Rast. Show all posts
Showing posts with label Rast. Show all posts

Monday, May 27, 2013

Yeah Yeah, Yet Another Rast Hack...


Materials: Ikea Rast chest of drawers (1), 4" Eames era hairpin legs (4), 9-5/8" Ikea Lansa Handles (3), 3" cabinet screws (8), finishing supplies, drill and circular saw.

Description: Assembled the drawers as per the original instructions, leaving off the included wooden pulls. Spackled the existing hardware holes on the drawer face and finished with white enamel paint. Finally, I measured for new hardware holes, drilled and attached the Ikea Lansa pulls. Note, the entire process of building the drawers took a few days between multiple coats of thinned enamel paint, dry/cure time and sanding.


The cabinet was a little less straight forward, it required trimming both side panels and repositioning the two connecting braces (originally intended between the middle-back and bottom-front). To start, I took measurements to determine the drawer positioning against the side panels, taking into account the width of the brace to be repositioned.


It turned out I cut approximately 3" off the bottom of each side panel. Attached the plastic drawer guides and top panel to the side panels as per the original instructions. Without the pre-drilled template holes, I kept the middle-back brace in the same position it was intended for, but moved it to the bottom of the cabinet. I repositioned the bottom-front brace parallel to the top panel just at the bottom front of the cabinet. Attached both braces with wood glue and cabinet screws. Attached the hairpin legs to the bottom four corners of the cabinet, drilling them directly into the repositioned braces. Finished with two coats of English oak stain and added the drawers.

~ Anthony, New York City

Thursday, May 23, 2013

IKEA Rast Hack {new nightstands}


Materials:
Rast dresser
Wood putty
Sand paper
1x4 the width of the dresser
2 1x6 the width of the dresser
About 40 feet of lattice (per dresser, if you're doing two dressers, get about 75 feet of lattice)
Drawer pulls
Stain
Paint
Floetrol
Polycrylic

Tools needed:
Miter saw
Nail gun
Putty knife

Description:
This is the IKEA Rast dresser. Pretty plain and boring, but solid wood and perfect for dressing up.

First thing I did was build up the bottom so that I could attach the base molding to something. I used one 1x4 and a piece of lattice behind it to build it out.

Then I cut the base molding and lattice to trim out all of the drawers and sides. I used my new miter saw I got for my birthday. Love it!



I then filled all the holes with wood putty and sanded, sanded, sanded.

Then I painted two coats of white paint. I put Floetrol in my paint to minimize the brush strokes. I used Sherwin Williams Antique White paint color.

I pre-stained the top "tray" that I put on the top of the nightstand. I placed two 1x6's and 1 1x4 side by side on the top and used the nail gun to fasten them to the top. And then I used stained lattice to trim around the edge of the top.

See more of the Rast nightstand.

~ Laura