Showing posts with label dining. Show all posts
Showing posts with label dining. Show all posts

Saturday, February 8, 2014

LINNMON and LERBERG, A Long and Narrow Dining Table


Materials: LINNMON table top, LERBERG trestle legs, ADILS legs

Description: We needed a long table for our dining room because we have a very large window seat. However, we were having a lot of trouble finding anything that was long enough without it either being much to wide for the space or way too expensive. So we decided to hack some IKEA!

1) We bought two of the 47 inch LINNMON table tops, two LERBERG trestle legs, and two ADILS table legs.

2) We connected the table tops with the ADILS legs by holding them together and screwing them so that two of the holes in the ADILS screw plate were on one table top and the other three on the other. This also gave the table added stability.



3) We flipped it over and put the LERBERG trestles on the ends.

The cost of the table was a total of $66.98! It was super simple to put together, and didn't require any extra materials.

A very simple, and very inexpensive hack which provided us with the perfect dining table for our space.

~ Lauren & Christopher, Colorado

Unaliberia and Unacucina


Materials:  Norden and others for kitchen, Ekby Trygvve and Ekby Töre for shelving

Description: The Hack is not mine but I could not resist bringing it to your attention to this extreme Ikeahacker.

Descriptions and more product information on their website.


See more of the hacks by Teste di legno.

~ Jesse

Tuesday, May 7, 2013

Breakfast bar/home office desk


Materials: AKURUM kitchen wall cabinet + LINNMON table top + cover panel

Description: We needed a dining table and home office desk in a very small area. Also needed storage space for office that wouldn't look cluttered.

Bought AKURUM kitchen WALL CABINET in the wood finish that matched existing furniture. We chose the 30" high X 39" wide cabinet and assembled it and sat it on the floor as the base of the table/desk. We could have bought short legs or built a base to raise it up higher, but chose not to because our existing stools were the right height to leave it as-is.

If you want to install doors to hide the shelves, you WILL need legs or a base for it so that the bottom edge of the doors will be off the floor. This wall cabinet has many holes pre-drilled for adjustable shelves so we bought 2 pairs of shelves that fit the entire width and installed them where we wanted (pegs are included with shelf purchase).



We bought a "cover panel" from the selection of cabinet doors and cover panels that also matched the existing furniture - we glued that on the back side of the cabinet since that side normally mounts on the wall and is not "finished".

There are several finishes to choose from. In order to be the right size, we bought one that had to be turned sideways and then we sawed off one edge that would be up against the wall, so it didn't need to be a "finished" edge. There are several sizes of wall cabinets and several sizes of doors or cover panels, so find the size and color you want.

Next, we found a LINNMON table top in black-brown that matched our stools (several colors are available). The size we choose for our space was about 24" X 48" and we placed that on top and positioned it where we wanted (a little more overhang on one side worked for us).

We attached it by drilling up through the top of the "cabinet" with wood screws. You can't see in the picture, but for an added effect, we installed a strip of Ikea's LED lights under the overhang on the finished side of the breakfast bar/desk. Perfect for home office and perfect for dining - fits in a very small space and the shelf contents stay hidden from view.

~ Rebecca & Manny, Orange Co. CALIF